| PRELIMINARY PROGRAM, September 8 |
| time CEST |
|
|
|
|
|
|
| 8.00-8.05 |
Greetings of the vice rector of University of Miskolc |
Péter Szűcs vice rector |
|
|
|
|
| 8.05-8.30 |
Plenary lecture |
László Palkovics minister |
|
|
|
|
| time CEST |
Session Welding I. |
Chairmen Marcell Gáspár, Mikihito Hirohata |
Session Materials & Technology I |
Chairman Gyula Varga |
Session Automation & Technology |
Chairmen József Vásárhelyi, Ákos Cservenák |
| 8.30-8.45 |
I. Borhy and L. Belső |
Design and manufacture requirements of welded car bodies and components for innovative railway vehicles |
Csongor Horváth |
The current situation of the rare-earth material usage in the field of electromobility |
Samad Dadvandipour and Aadil Gani Ganie |
An Approach to Implementation of Autoencoders in Intelligent Vehicles |
| 8.45-9.00 |
M. Gáspár, László Gyura and Raghawendra P. S. Sisodia |
The effect of multiple flame straightening on high-strength steels applied in vehicle industry |
M. Alktranee, M. A. Shehab, and P. Bencs |
Iron Oxide and Tungsten Trioxide Nanofluids to Enhance Automotive Cooling Radiators: Experimental Analysis |
Attila Trohák and Rabab Benotsmaneű |
Case Study of a Computer-Controlled RC Car Based on RF Wireless Communication |
| 9.00-9.15 |
Gang Chen, Natsumi Sakai, Mikihito Hirohata, Kengo Hyoma, Naoyuki Matsumoto and Koutarou Inose |
Bending Fatigue Characteristics of Butt Joints by Laser-Arc Hybrid Welding for Steel Bridge Members |
B. Kondás and Z. P. Kovács |
A new approach to steel grade selection for automotive parts |
Rabab Benotsmane and József Vásárhelyi |
Nonlinear Model Predictive Control for Autonomous Quadrotor Trajectory Tracking |
| 9.15-9.30 |
Márton Schramkó, Abdallah Kafi, László Gyura and Tünde Anna Kovács |
An experimental study between the gas metal arc welding ultraviolet effect and the distance: An experimental study of the gas metal arc welding ultraviolet effect as a function of the distance |
V. Ferencsik and Gy. Varga |
Investigation of Shape Correctness of Thermally Tested Alternator Stators |
László Porkoláb and István Lakatos |
Effect of non-conventional seating position on driver injuries in the case of a self-driving car |
| 9.30-9.45 |
Roland Jančo, Ladislav Écsi and Pavel Élesztős |
Numerical solution of the aluminum plate welding process by friction stir welding |
Máté File, Imre Kállai, Dávid Huri and Tamás Mankovits |
Optical investigation of the strain distribution with dif-ferent orientations on aerospace composite material |
Dávid Makó and Ákos Cservenák |
Implementation of a system for signaling the approach of emergency vehicles within other vehicles |
| 9.45-10.00 |
Martin Hnilica, Erika Hodúlová, Miroslav Sahul, Pavel Kovačócy, Beáta Šimeková, Ingrid Kovaříková |
Numerical simulation of laser beam welding of stainless steel and copper butt joint |
Sz. Jónás and P. Z. Kovács |
Multilayered Aluminum Clinch Joints: An Experimental and Numerical Investigation of the Manufacturing Process |
Ágnes Takács |
Safe in and out of the car |
| 10.00-10.15 |
B. Šimeková, Pavel Kovačócy, Miroslav Sahul, Ingrid Kovaříková, Maroš Martinkovič and Erika Hodúlová |
Electron beam welding of overlapped joints copper - stainless steel |
József Lénárt |
Extending an industrial robot with image processing system |
J. Nagy and I. Lakatos |
Possibilities of using of online vehicle diagnostics in the future |
| 10.15-10.30 |
László Kovács and László Takács |
Entropy-based numerical fatigue damage estimation process for metals |
Richárd Takács, András Lajos Nagy and Ibolya Zsoldos |
Investigation of turbocharger compressor wheel damage due to collision with condensed water droplets |
J. Répás and L. Berek |
Security and safety systems on modern vehicles |
|
Session Welding II. |
Chairman János Lukács |
Session Materials & Technology II |
Chairwoman Mária Berkes Marosné |
|
|
| 10.30-10.45 |
I. Kovaříková, Pavel Kovačócy, Miroslav Sahul, Beáta Šimeková, Maroš Martinkovič and Erika Hodúlová |
Laser beam welding of overlapped joints copper - stainless steel |
Kristóf Szabó |
Investigation of the Applicability of Topological Methods |
|
|
| 10.45-11.00 |
Tuomas Skriko, Timo Björk and Antti Ahola |
Design and Fabrication Factors for Fatigue Assessment of Welded Structures |
Sándor Gergő Tóth |
CFD analyses of the pressure distribution in hydrostatic journal bearings with different recess shapes |
|
|
| 11.00-11.15 |
Sahm alden Abd al al and Ákos Meilinger |
Investigation of resistance spot welded joints made on ultra-high strength steel sheets |
Pusta Jalalova, Fruzsina Fülöp and Mária Berkes Marosné |
Investigation of the tribological behaviour of advanced TiAlN and CrAlN hard coatings deposited on X153CrMoV12 cold work tool steel |
|
|
| 11.15-11.30 |
Judit Kovács and János Lukács |
Influence of filler metals on microstructure and mechani-cal properties of gas metal arc welded high strength steel |
Fruzsina Fülöp and Mária Berkes Marosné |
A comparative study on the tribological performance of a monolayer TiBN and multilayered TiBN/DLC coating on X210Cr12 tool steel |
|
|
| 11.30-11.45 |
Illés Sas and János Lukács |
Examination of absorbed specific fracture energy and notch opening displacement on S960QL steel and its welded joints |
László Soltész and László Berényi |
The appropriate way of sharing project information: a student approach |
|
|
| 11.45-12.00 |
Shazia Muzaffer, Kyong-Ho Chang and Zhen-Ming Wang |
Comparison of fatigue life of K joints with and without overlap using 3D fatigue FE analysis |
Dmytro Borysenko, János Kundrák, Bernhard Karpuschewski, Florian Welzel, Zsolt Maros and Csaba Felhő |
Surface Residual Stresses in High-Feed Face Milling of Carbon Steel |
|
|
| 12.00-12.15 |
|
|
Ziya Mehdiyev, Csaba Felhő and Péter Zoltán Kovács |
Investigation on 3D Printing Parameters of PLA Polymers for Gear Applications |
|
|
| PRELIMINARY PROGRAM, September 9 |
| time CEST |
Session Optimization |
Chairman Károly Jármai |
Session Design & Powertrain I. |
Chairmen Gabriella Bognár Vadászné, Ákos Cservenák |
Session Electric & Thermal |
Chairmen Endre Kovács, Máté Petrik |
| 8.00-8.15 |
A. Agárdi |
Fitness landscape analysis of population-based heuristics in solving a complex Vehicle Routing Problem |
Miklós Gábor Várkuli, Gabriella Bognár Vadászné
and József Szente |
Contact ratio of spiral bevel gears |
Róbert Orvai and Márk Csörnyei |
Investigations on the Effects of Capacitive Couplings in an Automotive Phase-Shifted Full-Bridge Power Supply Used in Electric Vehicles |
| 8.15-8.30 |
A. Agárdi |
Analysis of the Multi Objective Optimization techniques in solving a complex Vehicle Routing Problem |
Hangyu Lu, Jianwei Lu, Gabor Stepan and Denes Takacs |
Stability analysis and optimization of vehicle active motion control system with feedback time delay: Analysis of vehicle active control with feedback delay |
Mustafa M. Hasan and Krisztián Hriczó |
A Literature Review of a Dual-Purpose Solar Collector |
| 8.30-8.45 |
M. Z. Akkad, Yaman Rajab and Tamás Bányai |
Vehicle routing for municipal waste collection systems: analysis, comparison and application of heuristic methods |
Mihály Katona, Péter Kiss, Krisztián Gadó and Tamás Orosz |
Cogging torque analysis of Toyota Prius 2004 IPMSM motor with the Digital-Twin-Distiller |
J. F. Szabó |
Overview of the Market of Electric Cars by Multilogistic Curves |
| 8.45-9.00 |
Shaymaa Alsamia, Hazim Albedran and Károly Jármai |
Comparative study of different metaheuristics on CEC 2020 benchmarks |
József Kertész and Tünde Anna Kovács |
Effect of the radial constrain for the impact energy ab-sorbing behavior of the closed-cell metal foam |
Dénes Kocsis, Judit T. Kiss, Gábor Bellér and István Árpád |
Electromobility: the spreading of electric cars versus internal combustion engine vehicles |
| 9.00-9.15 |
Mortda Mohammed Sahib, György Kovács and Szabolcs Szávai |
Weight optimization of all-composite sandwich structures for automotive applications |
I. Tüske and Gy. Hegedűs |
Investigation of tilting table with parallel kinematic |
M. Petrik and G. Szepesi |
Investigation of the effect of a coolant inlet duct on the thermal performance of car radiators |
| 9.15-9.30 |
Mortda Mohammed Sahib, György Kovács and Szabolcs Szávai |
Optimum design for the bottom panel of a heavy-duty truck by using a composite sandwich structure |
Sándor Pálinkás |
Influence of speed to rolling resistance factor in case of autobus |
Ákos Lakatos and Alagba Henry Eze |
Comparison of thermal insulation performance of different materials used for aircrafts |
| 9.30-9.45 |
K. Mihály, M. Kulcsárné and Gy. Kulcsár |
Advanced methods to solve multi-project scheduling problems taking into account multiple objective functions |
Száva Ioan, Vlase Sorin, Gheorghe Vasile, Száva Renata Ildiko, Gálfi Botond Pál and Popa Gabriel |
New Adder and Distribution Gearbox used in the Transmission of the Heavy Truck |
Ali Habeeb Askar, Endre Kovács and Betti Bolló |
ANN Modeling for Thermal Load Estimation in a Cabin Vehicle |
| 9.45-10.00 |
Sz. Nagy, K. Jármai and A. Baksa |
Combination of GPU programming and FEM analysis in structural optimisation |
Zs. Drágár and L. Kamondi |
Length of contacting generating lines interpreted in the regular rectangular contact zone of helical gears and their zone dependence |
Mahir Faris Abdullah, Humam Kareem Jalghaf and Rozli Zulkifli |
A Critical review of multiple impingement jet mechanism for flow characteristics and heat transfer augmentation |
|
|
|
Session Design & Powertrain II. |
Chairmen György Kovács, Ferenc Sarka |
Session Logistics |
Chairmen Tamás Bányai, Zoltán Szamosi |
| 10.00-10.15 |
Károly Jármai |
Global and local cost calculations at welded structures |
H. Gharib and Gy. Kovács |
Diagnostic and prognostic strategies for monitoring of diesel engines’ technical conditions |
Péter Telek |
PROCESS-BASED SELECTION OF HANDLING EQUIPMENT IN THE AUTOMOTIVE PRODUCTION |
|
Session Vibration & Noise |
Chairmen Károly Jálics, László Rónai |
|
|
|
|
| 10.15-10.30 |
D. Nemes and S. Hajdú |
Vehicle dynamics modelling of the Mercedes-Benz REFORM 501 LE urban bus by using AVL Cruise software |
H. Gharib and Gy. Kovács |
Development of a Knowledge-Based System for diagnosing of diesel engines |
Tamás Bence Venczel, László Berényi and Krisztián Hriczó |
Evolution of Startups in Automotive Supply Chain |
| 10.30-10.45 |
L. R. Hári and P. Földesi |
Evaluation of a CUSUM-Type Changepoint Detector Applied in the Time-Frequency Domain of Synthetic Road Vehicle Vibrations |
F. Sarka |
Examination of Bolt Connection with Finite Element Method |
Attila Vámosi, Dániel Nemes, Levente Czégé an Imre Kocsis |
Investigation the effect of the data frequency on the driving cycle of an urban bus route |
| 10.45-11.00 |
L. R. Hári and P. Földesi |
An Approach for Hierarchical Clustering of Road Vehicle Vibration Spectrums |
I. Marada and J. Bihari |
Calculation methods and measurement of the heating of small plastic gears |
Tamás Bányai and Ákos Cservenák |
Logistics and mechatronics related research in mobile robot-based material handling |
| 11.00-11.15 |
László Rónai |
Investigation of the Vibrational Behavior of a Quarter-car Model |
R. Gast, S. Els, S. Kok, D.N. Wilke and T. Botha |
External Tyre Loading Predictions from Inner Tyre Deformation Measurements |
Julius Brinken, Björn Könecke, Malte Kania and Tom Assmann |
New generation hydrogen : - how to package pastous hydrogen for mobility applications |
| 11.15-11.30 |
Stanislav Žiaran and Ondrej Chlebo and Ľubomír Šooš |
Influence of kinematic excitation on the dynamic load of rotary machines bearings mounted on a rail vehicle |
Václav Mašek and Roman Čermák |
Design Study of the Low-Cost Advanced Riders Assistance System |
Tamás Bányai |
Transformation of conventional manufacturing and service systems into a cyber-physical environment: review of potential solutions |
| 11.30-11.45 |
Balázs J. Kriston and K. Jálics |
Malfunction or normal operation? Evaluation of the subjectivity of noise and vibration phenomena accompanying the operation of motor vehicles |
Tamás Fekete |
Load testing of Alternating Current Hydraulic Drive |
B. Kumar, Z. Szamosi and G. Szepesi |
A compendium analysis on the possible usage of advanced biofuels in the transport sector from a European perspective |
| 11.45-12.00 |
Márk Pesthy, Richárd Takács, Jan Rohde-Brandenburger and Csaba Tóth-Nagy |
Vibroacoustic Investigation of Automotive Turbochargers Focusing on the Effect of Lubricant Temperature and Bearing Conditions |
Hassan Sadah Muhssen, Ákos Bereczky and Máté Zöldy |
A Review on HCNG/Diesel Tri Fuel Engine Performance |
L. Tugyi, Z. Siménfalvi and G. Szepesi |
The Application of CFD software for modelling the dispersion of hydrogen gas at renewable energy fueling stations |
| 12.00-12.15 |
József Zoltán Szabó and Ferenc Dömötör |
Comparative testing of vibrations in vehicles driven by electric motor and engines of internal combustion engine (ICE) |
|
|
|
|
